Quad-display PCs : I370SB7-011

The Quad-display serie from IPC2U Partner Winmate support up to 4 displays with the same or different content. The solution is available with Intel® Core 2 Duo or AMD® Athlon 64 X2 processors. The graphic chip is NVIDIA Quadro NVS 440 for The I370SB7-11 and Matrox QID LP PCI-E for the A271SB7-011.

.

Features

• Stretched Desktop enables the desktop to be setup as one single large desktop in Microsoft XP instead of four independent ones (Overall Pixels 6400x1200 or 7680x1200)
• Independent Desktop enables the set up to 3 or 4 independent desktops at the same resolution (Overall Pixels 3200x2400 or 3840x2400)
• Multi Clone Desktop enables you to display the same desktop across all displays. (Four Clone displays or Dual Twin Clone)
• Pivot Mode. Multiple screen setup for viwing in landscape or portrait mode. In independent mode it permits rotation of all displays 90 or 270 degree.
• Power Desk supports multi-monitor awareness capability, resolution auto-detection, control dialog box and message box positioning.

.

Applications

• Financial and Insurance
• Medical Imaging
• Digital Signage / Public Information Display
• Security and Process Control
• Gaming

Quad-display PCs: I370SB7-011 PCs with Intel® Core 2 Duo Processors Features Built in Intel® Core 2 Duo Processors, up to 2.33GHz Support for up to four digital/analog monitors simultaneously Support Independent, Stretched and Dual+Dual Clone display modes Maximum resolution:1920 x 1200/per display for various multiple-display applications Auto-Stretched the display to full-screen by Nvidia Graphic Driver Switch Onbard VGA/ Graphic DMS-59 display function via BIOS setting, for content/schedule management Datasheet

System Specification Processor Intel® Core 2 Duo Processors, up to 2.33GHz BIOS Award 4Mbit System Chipset Intel® 945GME/ICH7M chipset System Memory 2 x DIMM, Max 4GB DDR2 667/533 Graphic Interface On-board VGA Controller / PCI-E x16 Graphic Card Ethernet Controller Dual Realtek RTL8111B Gigabit LAN Serial 2 x RS232, 1 x RS232/422/485* USB 6 x USB ports, USB 2.0 compliant KB / Mouse Connector 2 x PS/2 IDE 1 x 44pins IDE SATA 2 x SATA II Expansion Slot 1 x Mini PCI(Optional) I/O Connectors Front Side I/O 2 x USB Type-A Receptacle 1 x Power/HDD LED 1 x Power Reset Button 1 x Power on Button Back Side I/O 2 x RJ-45(10/100/1000 Mbps) 2 x PS/2 2 x RS-232 9P DSUB (male) 1 x RS-232/422/485 9P DSUB (male) 1 x VGA 15P DSUB (male) 4 x USB Type-A Receptacle 1 x Mic in/Line In/Line Out Audio Jack 1 x DMS-59 Conn Mechanical Dimensions (L x W x H) 330 x 250 x 70 mm Color S:Silver Construction Aluminum housing / Metal Power Input +12V DC-in (Lockable, Power Jack) Power source range Typical 8A@ +12V power input Graphic Specification Graphic Controller Nvidia Quadro NVS 440 graphics (PCI-E x16) Graphic Memory 256 MB Graphics Output Connector DMS-59 w/ 2*DMS-59-to-DVI Dual-monitor adapter cable Graphics Software Nvidia display driver and Nvidia nView Multi-display Max. of Computer Monitors 4 / 4 / 4 (Digital/Analog/Total)

Note: All Specifications are subject to change without prior notice! * If you use SBC on-board RS485, you need to set appropriate state of RTS line before sending/receiving data in your software program.We offer additional board that can perform auto-direction hardware function.

Quad-display PCs : A271SB7-011

Quad-display PCs: A271SB7-011 PCs with AMD® Athlon 64 X2 / Athlon X2 BE Processors Features Built in AMD® Athlon 64 X2 / Athlon X2 BE Processors, up to 2.6GHz Support for up to four digital/analog monitors simultaneously Support Independent, Stretched and Clone display modes Maximum resolution:1600 x 1200/per display for various multiple-display applications Auto-Stretched the display to full-screen by Matrox Graphic Driver Switch Onbard VGA/ Graphic KX-20 display function via BIOS setting, for content/schedule management Datasheet Product Video Product introduction

System Specification Processor AMD® Athlon 64 X2 / Athlon X2 BE Processors, up to 2.6GHz BIOS Phoenix 8Mbit Flash System Chipset AMD M690G / SB600 chipset System Memory 2 x DIMM, Max 4GB DDR2 800/667/533 Graphic Interface On-board VGA Controller / PCI-E x16 Graphic Card Ethernet Controller Dual Realtek RTL8111B Gigabit LAN Serial 3 x RS232, 1 x RS232/422/485* USB 6 x USB ports, USB 2.0 compliant KB / Mouse Connector 2 x PS/2 IDE 1 x 44pins IDE SATA 2 x SATA II Expansion Slot 1 x Mini PCI(Optional) I/O Connectors Front Side I/O 2 x USB Type-A Receptacle 1 x Power/HDD LED 1 x Power Reset Button 1 x Power on Button Back Side I/O 2 x RJ-45(10/100/1000 Mbps) 2 x PS/2 2 x RS-232 9P DSUB (male) 1 x VGA 15P DSUB (male) 4 x USB Type-A Receptacle 1 x Mic in/Line In/Line Out Audio Jack 1 x KX20 Mechanical Dimensions (L x W x H) 330 x 250 x 70 mm Color S:Silver Construction Aluminum housing / Metal Power Input +12V DC-in (Lockable, Power Jack) Power source range Typical 8A@ +12V power input Graphic Specification Graphic Controller Matrox QID LP PCIe graphics card (PCI-E x16) Graphic Memory 128 MB Graphics Output Connector KX20 w/ KX20-to-DVI quad-monitor adapter cable Graphics Software Matrox display driver and Matrox PowerDesk Max. of Computer Monitors 4 / 4 / 4 (Digital/Analog/Total)

Note: All Specifications are subject to change without prior notice! * If you use SBC on-board RS485, you need to set appropriate state of RTS line before sending/receiving data in your software program. We offer additional board that can perform auto-direction hardware function

.

Please contact your IPC2U representative or sales@ipc2u.de for further information.