|
|
+49(0) 511 807 259-0
-
-
Poll
Quick subscription
IPC2U annouces new Industrial Controller series (G-4500 series) - Mini-Programmable Automation Controller
IPC2U announces the mini-style G-4500 series. The G-4500 features M2M (Machine to Machine) which is the hottest topic in the 21 century. Instant monitoring, immediate message sharing, quick responding, and so on are becoming the popular issues when ...19.11.2008New Mini-Programmable Automation Controller - G-4500 series
Industrial Controller G-4500 series: G-4500-SIM300, G-4500D-SIM300, G-4500P-SIM300, G-4500PD-SIM300
IPC2U announces the mini-style G-4500 series. The G-4500 features M2M (Machine to Machine) which is the hottest topic in the 21 century. Instant monitoring, immediate message sharing, quick responding, and so on are becoming the popular issues when speaking of machines. Most importantly, an intelligent, efficient machine effectively lowers your labor cost which always counts the most.
A compact programmable automation controller plus an antenna makes G-4500 series born in the world. With built-in GPRS/GSM, G-4500 does more than just working alone by itself. G-4500 not only monitors the data but sends them out in real time to the control center if necessary.
Also, by combining a GPS (optional) with G-4500 series, G-4500 series suddenly becomes a tracking system which you can often find out in the car system, marine system, etc. Inside G-4500, a high-performance CPU is working over there; outside G-4500, you get the standard interface of an antenna, an Ethernet port, 3 digital inputs, 3 digital outputs, 8 analog inputs, 2 RS-232 COM ports and 1 RS-485 COM port. GPS is optional.
There are G-4500 and G-4500D for your options. G-4500D equips with a 128x64 display for direct data presenting.
Please contact us under, sales@ipc2U.de for further information of below products.Industrial Controller G-4500 series:
G-4500-SIM300 / G-4500D-SIM300
G-4500P-SIM300 / G-4500PD-SIM300
Abb.: Industrial Controller G-4500 series: G-4500-SIM300, G-4500D-SIM300, G-4500P-SIM300, G-4500PD-SIM300
WADE-8067 - Intel® 45nm Core™ 2 Duo processor or Celeron® M processor based Mini-ITX Board with DDR3 SDRAM, Four SATA, HDMI, Dual Gigabit Ethernet, Six USB 2.0 ports
- Embedded MiniOS7, anti-virus
- Supports a variety of TCP/IP features, including TCP, UDP, IP, ICMP, ARP
- 10/100 BASE-T NE2000 compatible Ethernet Controller
- COM port: COM1 (5-wire RS232), COM2 (RS-485), COM3 (3-wire RS232)
- Built-in self-tuner ASIC controller on RS-485 port
- I/O: 3 channel DI, 3 channel DO, 8 channel AI
- Support SD storage card
- GPRS/GSM: Tri-Band 900/1800/1900 MHz, Quad-band 850/900/1800/1900(option)
- Support TCP server, TCP client, UDP client connection from GPRS
- GPS : 16 channels with All-In-View tracking (option)
- 128*64 dots LCM display (only for G-4500D-SIM300)
- Support for Virtual COM technology
- Support Modbus Protocol
- High reliability in harsh environment
- Free easy-to-use software development toolkits
Application 1 : Remote Control/Monitor System 
Application 2: Car Monitor System 
Application 3: GIS system 
Application 4: Redundance Communication System Technical Details Power supply Power requirements +10 to +30 VDC power Power consumption Operating mode < 3.6 W (GPRS transmission; GPS receiving) General environment Operating temperature -25°C to +50°C Storage temperature -40°C to +80°C Humidity 5% to 95% Non-condensing System CPU G-4500 : 80186, 80M Hz SRAM 512K Bytes Flash Memory 512K Bytes, Erase unit is 64K Bytes, 1,000,000 erase/write cycle OS MiniOS7 of ICP DAS (64K bytes) NVSRAM 31 bytes, battery backup, data valid up to 10 years EEPROM 16K bytes, data retention> 40 year. 1,000,000 erase/write cycles Real time clock Gives time(sec, min, hour) & date, leap year compensation from 1980 to 2079 Watchdog timer Yes Serial ports COM1 RS-232 : TXD,RXD,RTS,CTS,GND COM2 RS-485 self-tuner ASIC inside ; D2+, D2- COM3 RS-232 : TXD,RXD, GND Ethernet 10M/100M bps DIO channel Input 3 digital input channels
Input type : Sink
On Voltage : +3.5V~+30V
Off Voltage : +1V Max.Output 3 digital output channels
Output type : Open-Collector (NPN)
Load Voltage : +30V Max.
Load Current : 100mA Max.AI channel Input 8 analog input
Resolution : 12-bit
Input Range/Type : 0~20Ma
Sample Rate : 1KHz Max (Read one channel)Expand Memory Interface MMC/SD socket Data Format : FAT16 Development tool C programming Supports TC 1.0~3.0/TC++ 1.0~3.0/BC 2.0/BC++ 3.1~5.02/MSC8.00c/MSVC++ 1.52. Provides C Lib functions for GPRS Digital I/O Analog input read/write COM Port, EEPROM, RTC, FLASH, SRAM timer, Watchdog, Program downloaded from PC via COM1 Protocols Remote I/O COM2 Supports I-7000 and I-87K remote I/O module COM1 and COM3 via I-7188 or I-8000 control connect I-7000 and I-87K remote I/O module or PLC or X Boards User defined protocol User can write his own protocol LED light LED LED * 3 GPRS/GSM system GPRS/GSM GPRS/GSM Tri-Band 900/1800/1900 MHz
GPRS multi-slot : class 10/8
GPRS mobile station : class B
GPRS class 10 : max. 85.6 kbps
CSD up to 14.4 kbps
Compliant to GSM phase 2/2+
-Class 4(2W @ 900 MHz)
-Class 1(1W @ 1800/1900 MHz)
Coding schemes : CS 1, CS 2,CS 3,CS 4
SMS: Text and PDU modeGPS system GPS 16 channels with All-In-View tracking
Built-in high gain amplifier and bandpass filter
Cold/Warm Time: 42 / 35 sec. at open sky and stationary environments.
Reacquisition Time: 0.1 second
Extra high sensitivity: -159dBm
SMA ConnectorLCD Display Module LCM Character Format: 128*64 Dots
Dot size: 0.48(W)*0.48(H)mm
Dot pitch: 0.52 (W)*0.52(H)mm
Module dimension: 93(W)*70(H)*1.6(T) mm
Effective display area: 80.61(W)*14.37(H) mm
Viewing direction: 12 O’clock
Lcd type : STN(Y-G), Positive, Transflective
Life Time : Expected life is more than 100,000 hours under normal
operating conditionCase Dimensions 154mm X 118mm X 42mm (long*width* high) Order Information
Please contact our sales team for further information: sales@ipc2U.de